Welcome to BM-switch.com store.

48x1G + 8x10G Netberg Aurora 220 preloaded with ICOS NOS

More Views

48x1G + 8x10G Netberg Aurora 220 preloaded with ICOS NOS
$1,999.00

Simple yet powerful, Netberg Aurora 220 switch is made for L3 environments with an open approach. 48x 1G Base-T ports are accompanied by 8x 10G SFP+ ports for uplinks or storage connection. It’s unique port configuration allows to build flexible network architectures in data center or enterprise environment, where all-10G connection is not required yet.


Pre-loaded with Broadcom ICOS.

* Required Fields

Description

Details

Built around Broadcom Helix4 silicon and embedded ARM CPU, the Aurora 220 decrease OPEX to almost traditional L2 switch level.

Available in Back to Front (BtoF) and Front to Back (FtoB) airflow configurations.

Check this link for the user manuals.

Box includes

  • Switch box with 48 x 1G Base-T and 8 x 10G SFP+ ports

  • Dual AC PSU

  • Console cable

  • ONIE installer

  • Broadcom ICOS distribution pre-installed

 

Features

 

Performance

Switching capacity: 150Gbps Broadcom Helix4 BCM56344
ARM embedded CPU, 1 GHz
Forwarding rate: 190Mpps
Memory: 2GB DDR3 ECC
Storage: 2GB NAND flash
Routing Tables: Uniform MAC/VLAN/L3 hosts up to 96K
Jumbo Packet: 12K bytes

 

Software

ICOS 3.0 software stack implementation. To be updated along with the development.

NOTE: The limitation with current HW is that you can do L3 routing, or you have hardware terminate VXLAN tunnels, but not both at the same time.
 
Layer 2 features
Link aggregation:
* 802.3ad with LACP
* Max number of group: 8
* Unicast/Multicast traffic balance
* Virtual Port Channel (MLAG)

VLAN:
* IEEE 802.1Q
* Port-Based
* Private VLAN
* Voice VLAN

Spanning Tree:
* IEEE 802.1D
* IEEE 802.1w
* IEEE 802.1s
* Spanning Tree Fast Forwarding
* Edge port (same as Fast Forwarding)
* Auto Edge
* BPDU Filter/Guard
* Loop Guard
* TCN Guard
* Root Guard

Storm Control:
* Broadcast
* Unknown Multicast
* DLF (Unknown Unicast)

IGMP Snooping:
* IGMP Snooping v1/v2/v3
* IGMP v1/v2 querier support
* IGMP Immediate Leave
* MLD Snooping
* Jumbo frame
* IEEE 802.3x Flow Control
* Q-in-Q

IPv6
* V4/V6 dual stack
* ICMPv6
* ICMPv6 redirect
* IPv6 Path MTU Discovery
* IPv6 Neighbor Discovery
* Stateless Autoconfiguration
* Manual Configuration
* DHCPv6
* SNMP over IPv6
* HTTP over IPv6
* SSH over IPv6
* IPv6 Telnet support
* IPv6 DNS resolver
* IPv6 RADIUS support
* IPv6 TACACS+ support
* IPv6 Syslog support
* IPv6 SNTP support
* IPv6 TFTP support
* Remote IPv6 ping

QoS features
* Number of priority queue: 8
* Scheduling:
** WRR
** Strict priority
** Hybrid (WRR+Strict priority)
* CoS:
** 802.1p-based CoS
** IP TOS Precedence based CoS
** IP DSCP based CoS
* DiffServ:
** 32 classes
** 13 rules per class
** No. class in policy: 64
** No. policy in class: 28
* Auto VoIP

Layer 3 Features
* Number of IP interfaces: 128
* Multinetting/CIDR
* /31 subnet support
* IP ARP
* Proxy ARP
* Local proxy ARP
* IRDP
* Static route
* ECMP
* OSFP v2/v3
* BGP v4/v6
* Multicast:
** Multicast groups
** IGMP v1/v2/v3
** MLD v1/v2
** DVMRP
** PIM-DM v4/v6
** PIM-SM v4/v6
** IGMP proxy
* VRRP
* Loopback
* Routes:
** IPv4
** IPv6
** ARP entry
** ND entries
** IP IGMP/MLD
** PIM-SM/DM v4/v6
** DVMRP
* Source IP configuration
* Policy-based routing (PBR)
* IPv6 Tunneling
* IPv6 Loopback
* DHCPv6 relay
* DHCPv6 server

Security
* Static/Dynamic Port Security (MAC-based)
* 802.1x:
** Port based
** MAC based
** VLAN assignmnet
** Guest VLAN
** Unauthenticated VLAN
** QoS assignment
* ACL:
** L2: MAC SA/DA, CoS, EtherType
** L3: IPv4 SA/DA, subnet based
** L3: IPv6 SA/DA, flow-label, DSCP
** L4: TCP/UDP port
** Time-based ACL
* RADIUS:
** Authentication
** Accounting
* TACACS+:
** Authentication
* HTTPS & SSL
* SSH 1.5/2.0
* User authentication:
** Local
** RADIUS/TACACS+
** AAA
* DoS control
* MAC filter
* IP Source Guard
* Dynamic ARP inspection
* DHCP snooping
* Control Plane Policy (CoPP)

Management
* Industry standard CLI
* CLI filtering
* Telnet/SSH
* Software/configuration upload/download using TFTP/XMODEM/HTTP/FTP/SCP/SFTP
* Dual image
* SNMP v1/v2c/v3
* RMON 1,2,3,9 groups
* BOOTP client/relay
* DHCP:
** Client
** Server
** Relay
** L2 option 82 relay
** L3 option 82 relay
* Event log
* DNS client
* Utility: remote ping, traceroute
* SNTP v4
* LLDP: 802.1AB, 802.MED
* CDP
* UDLD
* Port mirroring:
** SPAN: one-to-one, many-to-one
** SPAN with ACL filter
** SPAN with VLAN
** RSPAN
* sFlow v5
* Cable test
* Email alerting
* Auto install
* RESTCONF interface
* NetSNMP

Data Center
* ONIE enabled boot loader
* Congestion Notification (CN)
* ETS
* PFC
* OpenFlow 1.0
* OpEN API
* Puppet/Chef support

 

 

Warranty

3 years

Additional Information

Additional Information

Manufacturer Netberg
Reviews